// Sketch to display images on a 160 x 128 TFT
 
 // Renders images stored in an array in program (FLASH)
 // The JPEG images are stored in header files (see jpeg1.h etc)
 
 // As well as the TFT_eSPI library:
 // https://github.com/Bodmer/TFT_eSPI
 // the sketch needs the JPEG Decoder library. This can be loaded via the Library Manager.
 // or can be downloaded here:
 // https://github.com/Bodmer/JPEGDecoder
 
 //----------------------------------------------------------------------------------------------------
 
 #include <SPI.h>
 #include <TFT_eSPI.h>
 
 TFT_eSPI tft = TFT_eSPI();
 
 
 // JPEG decoder library
 #include <JPEGDecoder.h>
 
 // Return the minimum of two values a and b
 #define minimum(a,b)     (((a) < (b)) ? (a) : (b))
 
 // Include the sketch header file that contains the image stored as an array of bytes
 // More than one image array could be stored in each header file.
 #include "jpeg1.h"
 #include "jpeg2.h"
 #include "jpeg3.h"
 #include "jpeg4.h"
 
 // Count how many times the image is drawn for test purposes
 uint32_t icount = 0;
 //----------------------------------------------------------------------------------------------------
 
 
 //####################################################################################################
 // Setup
 //####################################################################################################
 void setup() {
   Serial.begin(115200);
   tft.begin();
 }
 
 //####################################################################################################
 // Main loop
 //####################################################################################################
 void loop() {
 
   tft.setRotation(0);  // portrait
   tft.fillScreen(TFT_BLACK);
 
   drawArrayJpeg(EagleEye, sizeof(EagleEye), 0, 16); // Draw a jpeg image stored in memory at x,y
   delay(2000);
 
   tft.setRotation(0);  // portrait
   tft.fillScreen(TFT_BLACK);
   drawArrayJpeg(Tiger, sizeof(Tiger), 4, 0); // Draw a jpeg image stored in memory
   delay(2000);
 
   tft.setRotation(1);  // landscape
   tft.fillScreen(TFT_BLACK);
   drawArrayJpeg(Baboon, sizeof(Baboon), 0, 4); // Draw a jpeg image stored in memory
   delay(2000);
 
   tft.setRotation(1);  // landscape
   tft.fillScreen(TFT_BLACK);
   drawArrayJpeg(Mouse160, sizeof(Mouse160), 0, 11); // Draw a jpeg image stored in memory
 
   delay(2000);
 }
 
 //####################################################################################################
 // Draw a JPEG on the TFT pulled from a program memory array
 //####################################################################################################
 void drawArrayJpeg(const uint8_t arrayname[], uint32_t array_size, int xpos, int ypos) {
 
   int x = xpos;
   int y = ypos;
 
   JpegDec.decodeArray(arrayname, array_size);
   
   jpegInfo(); // Print information from the JPEG file (could comment this line out)
   
   renderJPEG(x, y);
   
   Serial.println("#########################");
 }
 
 //####################################################################################################
 // Draw a JPEG on the TFT, images will be cropped on the right/bottom sides if they do not fit
 //####################################################################################################
 // This function assumes xpos,ypos is a valid screen coordinate. For convenience images that do not
 // fit totally on the screen are cropped to the nearest MCU size and may leave right/bottom borders.
 void renderJPEG(int xpos, int ypos) {
 
   // retrieve infomration about the image
   uint16_t *pImg;
   uint16_t mcu_w = JpegDec.MCUWidth;
   uint16_t mcu_h = JpegDec.MCUHeight;
   uint32_t max_x = JpegDec.width;
   uint32_t max_y = JpegDec.height;
 
   // Jpeg images are draw as a set of image block (tiles) called Minimum Coding Units (MCUs)
   // Typically these MCUs are 16x16 pixel blocks
   // Determine the width and height of the right and bottom edge image blocks
   uint32_t min_w = minimum(mcu_w, max_x % mcu_w);
   uint32_t min_h = minimum(mcu_h, max_y % mcu_h);
 
   // save the current image block size
   uint32_t win_w = mcu_w;
   uint32_t win_h = mcu_h;
 
   // record the current time so we can measure how long it takes to draw an image
   uint32_t drawTime = millis();
 
   // save the coordinate of the right and bottom edges to assist image cropping
   // to the screen size
   max_x += xpos;
   max_y += ypos;
 
   // read each MCU block until there are no more
   while (JpegDec.readSwappedBytes()) {
 	  
     // save a pointer to the image block
     pImg = JpegDec.pImage ;
 
     // calculate where the image block should be drawn on the screen
     int mcu_x = JpegDec.MCUx * mcu_w + xpos;  // Calculate coordinates of top left corner of current MCU
     int mcu_y = JpegDec.MCUy * mcu_h + ypos;
 
     // check if the image block size needs to be changed for the right edge
     if (mcu_x + mcu_w <= max_x) win_w = mcu_w;
     else win_w = min_w;
 
     // check if the image block size needs to be changed for the bottom edge
     if (mcu_y + mcu_h <= max_y) win_h = mcu_h;
     else win_h = min_h;
 
     // copy pixels into a contiguous block
     if (win_w != mcu_w)
     {
       uint16_t *cImg;
       int p = 0;
       cImg = pImg + win_w;
       for (int h = 1; h < win_h; h++)
       {
         p += mcu_w;
         for (int w = 0; w < win_w; w++)
         {
           *cImg = *(pImg + w + p);
           cImg++;
         }
       }
     }
 
     // draw image MCU block only if it will fit on the screen
     if (( mcu_x + win_w ) <= tft.width() && ( mcu_y + win_h ) <= tft.height())
     {
       tft.pushRect(mcu_x, mcu_y, win_w, win_h, pImg);
     }
     else if ( (mcu_y + win_h) >= tft.height()) JpegDec.abort(); // Image has run off bottom of screen so abort decoding
   }
 
   // calculate how long it took to draw the image
   drawTime = millis() - drawTime;
 
   // print the results to the serial port
   Serial.print(F(  "Total render time was    : ")); Serial.print(drawTime); Serial.println(F(" ms"));
   Serial.println(F(""));
 }
 
 //####################################################################################################
 // Print image information to the serial port (optional)
 //####################################################################################################
 void jpegInfo() {
   Serial.println(F("==============="));
   Serial.println(F("JPEG image info"));
   Serial.println(F("==============="));
   Serial.print(F(  "Width      :")); Serial.println(JpegDec.width);
   Serial.print(F(  "Height     :")); Serial.println(JpegDec.height);
   Serial.print(F(  "Components :")); Serial.println(JpegDec.comps);
   Serial.print(F(  "MCU / row  :")); Serial.println(JpegDec.MCUSPerRow);
   Serial.print(F(  "MCU / col  :")); Serial.println(JpegDec.MCUSPerCol);
   Serial.print(F(  "Scan type  :")); Serial.println(JpegDec.scanType);
   Serial.print(F(  "MCU width  :")); Serial.println(JpegDec.MCUWidth);
   Serial.print(F(  "MCU height :")); Serial.println(JpegDec.MCUHeight);
   Serial.println(F("==============="));
 }
 
 //####################################################################################################
 // Show the execution time (optional)
 //####################################################################################################
 // WARNING: for UNO/AVR legacy reasons printing text to the screen with the Mega might not work for
 // sketch sizes greater than ~70KBytes because 16 bit address pointers are used in some libraries.
 
 // The Due will work fine with the HX8357_Due library.
 
 void showTime(uint32_t msTime) {
   //tft.setCursor(0, 0);
   //tft.setTextFont(1);
   //tft.setTextSize(2);
   //tft.setTextColor(TFT_WHITE, TFT_BLACK);
   //tft.print(F(" JPEG drawn in "));
   //tft.print(msTime);
   //tft.println(F(" ms "));
   Serial.print(F(" JPEG drawn in "));
   Serial.print(msTime);
   Serial.println(F(" ms "));
 }
 

© 2023 acidvegas, inc • generated with stagit