acid-drop

- Hacking the planet from a LilyGo T-Deck using custom firmware

git clone git://git.acid.vegas/acid-drop.git

Setup70d_ILI9488_S3_Parallel.h (834B)

      1 
      2 #define USER_SETUP_ID 146
      3 
      4 #define TFT_PARALLEL_8_BIT
      5 
      6 //#define ILI9341_DRIVER
      7 //#define ST7796_DRIVER
      8 #define ILI9488_DRIVER
      9 
     10 // ESP32 S3 pins used for the parallel interface TFT
     11 #define TFT_CS    9
     12 #define TFT_DC    8  // Data Command control pin - must use a GPIO in the range 0-31
     13 #define TFT_RST  34
     14 
     15 #define TFT_WR    7  // Write strobe control pin - must use a GPIO in the range 0-31
     16 #define TFT_RD    6
     17 
     18 #define TFT_D0   12  // Must use GPIO in the range 0-31 for the data bus
     19 #define TFT_D1   13  // so a single register write sets/clears all bits
     20 #define TFT_D2   14
     21 #define TFT_D3   15
     22 #define TFT_D4   16
     23 #define TFT_D5   21
     24 #define TFT_D6    5
     25 #define TFT_D7    4
     26 
     27 
     28 #define LOAD_GLCD
     29 #define LOAD_FONT2
     30 #define LOAD_FONT4
     31 #define LOAD_FONT6
     32 #define LOAD_FONT7
     33 #define LOAD_FONT8
     34 #define LOAD_GFXFF
     35 
     36 #define SMOOTH_FONT