acid-drop

- Hacking the planet from a LilyGo T-Deck using custom firmware

git clone git://git.acid.vegas/acid-drop.git

Setup70_ESP32_S2_ILI9341.h (948B)

      1 // Setup for the ESP32 S2 with ILI9341 display
      2 // Note SPI DMA with ESP32 S2 is not currently supported
      3 #define USER_SETUP_ID 70
      4 // See SetupX_Template.h for all options available
      5 #define ILI9341_DRIVER
      6 
      7                     // Typical board default pins
      8 #define TFT_CS   10 //     10 or 34
      9 
     10 #define TFT_MOSI 11 //     11 or 35
     11 #define TFT_SCLK 12 //     12 or 36
     12 #define TFT_MISO 13 //     13 or 37
     13 
     14 #define TFT_DC   14
     15 #define TFT_RST  15
     16 
     17 //#define TOUCH_CS 16 // Optional for touch screen
     18 
     19 #define LOAD_GLCD
     20 #define LOAD_FONT2
     21 #define LOAD_FONT4
     22 #define LOAD_FONT6
     23 #define LOAD_FONT7
     24 #define LOAD_FONT8
     25 #define LOAD_GFXFF
     26 
     27 #define SMOOTH_FONT
     28 
     29 // FSPI port will be used unless the following is defined
     30 #define USE_HSPI_PORT
     31 
     32 //#define SPI_FREQUENCY  27000000
     33 #define SPI_FREQUENCY  40000000   // Maximum for ILI9341
     34 
     35 #define SPI_READ_FREQUENCY  6000000 // 6 MHz is the maximum SPI read speed for the ST7789V
     36 
     37 #define SPI_TOUCH_FREQUENCY 2500000