acid-drop

- Hacking the planet from a LilyGo T-Deck using custom firmware
git clone git://git.acid.vegas/acid-drop.git
Setup51_LilyPi_ILI9481.h (1367B)
      1 #define USER_SETUP_ID 51
      2 
      3 #define ILI9481_DRIVER
      4 
      5 #define TFT_BL   12				// LED back-light control pin
      6 #define TFT_BACKLIGHT_ON HIGH	// Level to turn ON back-light (HIGH or LOW)
      7 
      8 #define TFT_MISO 23
      9 #define TFT_MOSI 19
     10 #define TFT_SCLK 18
     11 #define TFT_CS   5   // Chip select control pin
     12 #define TFT_DC   27  // Data Command control pin
     13 #define TFT_RST  -1  // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST
     14 
     15 #define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
     16 #define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
     17 #define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
     18 #define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
     19 #define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-.
     20 #define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
     21 //#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
     22 #define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
     23 
     24 #define SMOOTH_FONT
     25 
     26 #define SPI_FREQUENCY		26666666
     27 #define SPI_READ_FREQUENCY  20000000