acid-drop

- Hacking the planet from a LilyGo T-Deck using custom firmware
git clone git://git.acid.vegas/acid-drop.git
Log | Files | Refs | Archive | README | LICENSE

Setup4_S6D02A1.h (1533B)

      1 // See SetupX_Template.h for all options available
      2 #define USER_SETUP_ID 4
      3 
      4 #define S6D02A1_DRIVER
      5 
      6 
      7 // For NodeMCU - use pin numbers in the form PIN_Dx where Dx is the NodeMCU pin designation
      8 #define TFT_CS   PIN_D8  // Chip select control pin D8
      9 #define TFT_DC   PIN_D3  // Data Command control pin
     10 #define TFT_RST  PIN_D4  // Reset pin (could connect to NodeMCU RST, see next line)
     11 //#define TFT_RST  -1  // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V
     12 
     13 
     14 #define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
     15 #define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
     16 #define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
     17 #define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
     18 #define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
     19 #define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
     20 //#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
     21 #define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
     22 
     23 #define SMOOTH_FONT
     24 
     25 
     26 // #define SPI_FREQUENCY  20000000
     27 #define SPI_FREQUENCY  27000000
     28 // #define SPI_FREQUENCY  40000000
     29 
     30 #define SPI_TOUCH_FREQUENCY  2500000
     31 
     32 
     33 // #define SUPPORT_TRANSACTIONS