acid-drop

- Hacking the planet from a LilyGo T-Deck using custom firmware
git clone git://git.acid.vegas/acid-drop.git
Log | Files | Refs | Archive | README | LICENSE

Setup46_GC9A01_ESP32.h (1309B)

      1 // See SetupX_Template.h for all options available
      2 #define USER_SETUP_ID 46
      3 
      4 #define GC9A01_DRIVER
      5 
      6 #define TFT_MISO 19
      7 #define TFT_MOSI 23
      8 #define TFT_SCLK 18
      9 #define TFT_CS    15  // Chip select control pin
     10 #define TFT_DC    2  // Data Command control pin
     11 #define TFT_RST   4  // Reset pin (could connect to RST pin)
     12 //#define TFT_RST  -1  // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST
     13 
     14 #define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
     15 #define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
     16 #define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
     17 #define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
     18 #define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
     19 #define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
     20 #define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
     21 #define SMOOTH_FONT
     22 
     23 #define SPI_FREQUENCY  40000000
     24 
     25 #define SPI_READ_FREQUENCY  20000000
     26 
     27 #define SPI_TOUCH_FREQUENCY  2500000
     28 
     29 // #define SUPPORT_TRANSACTIONS