acid-drop

- Hacking the planet from a LilyGo T-Deck using custom firmware
git clone git://git.acid.vegas/acid-drop.git
Setup43_ST7735.h (2261B)
      1 // Setup for ESP32 and ST7735 80 x 160 TFT
      2 #define USER_SETUP_ID 43
      3 // See SetupX_Template.h for all options available
      4 
      5 #define ST7735_DRIVER
      6 
      7 
      8 #define TFT_WIDTH  80
      9 #define TFT_HEIGHT 160
     10 
     11 
     12 #define ST7735_GREENTAB160x80
     13 
     14 // For ST7735, ST7789 and ILI9341 ONLY, define the colour order IF the blue and red are swapped on your display
     15 // Try ONE option at a time to find the correct colour order for your display
     16 
     17 //  #define TFT_RGB_ORDER TFT_RGB  // Colour order Red-Green-Blue
     18 //  #define TFT_RGB_ORDER TFT_BGR  // Colour order Blue-Green-Red
     19 
     20 #ifdef ESP32
     21 #define TFT_MISO 19
     22 #define TFT_MOSI 23
     23 #define TFT_SCLK 18
     24 #define TFT_CS    15  // Chip select control pin
     25 #define TFT_DC    2  // Data Command control pin
     26 #define TFT_RST   4  // Reset pin (could connect to RST pin)
     27 //#define TFT_RST  -1  // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST
     28 #else
     29 // Display GND       to NodeMCU pin GND (0V)
     30 // Display VCC       to NodeMCU 5V or 3.3V
     31 // Display SCK       to NodeMCU pin D5
     32 // Display SDI/MOSI  to NodeMCU pin D7
     33 // Display BLK       to NodeMCU pin VIN
     34 #define TFT_CS   PIN_D8  // Chip select control pin D8
     35 #define TFT_DC   PIN_D3  // Data Command control pin
     36 #define TFT_RST  PIN_D4  // Reset pin (could connect to NodeMCU RST, see next line)
     37 #endif
     38 
     39 #define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
     40 #define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
     41 #define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
     42 #define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
     43 #define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
     44 #define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
     45 //#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
     46 #define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
     47 
     48 #define SMOOTH_FONT
     49 
     50 
     51 //#define SPI_FREQUENCY  20000000
     52   #define SPI_FREQUENCY  27000000 // Actually sets it to 26.67MHz = 80/3