acid-drop- Hacking the planet from a LilyGo T-Deck using custom firmware |
git clone git://git.acid.vegas/acid-drop.git |
Log | Files | Refs | Archive | README | LICENSE |
Setup3_ILI9163.h (1581B)
1 // See SetupX_Template.h for all options available 2 #define USER_SETUP_ID 3 3 4 #define ILI9163_DRIVER 5 6 7 #define TFT_WIDTH 128 8 #define TFT_HEIGHT 160 9 10 11 // For NodeMCU - use pin numbers in the form PIN_Dx where Dx is the NodeMCU pin designation 12 #define TFT_CS PIN_D8 // Chip select control pin D8 13 #define TFT_DC PIN_D3 // Data Command control pin 14 #define TFT_RST PIN_D4 // Reset pin (could connect to NodeMCU RST, see next line) 15 //#define TFT_RST -1 // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V 16 17 18 #define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH 19 #define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters 20 #define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters 21 #define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm 22 #define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:. 23 #define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-. 24 //#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT 25 #define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts 26 27 #define SMOOTH_FONT 28 29 30 // #define SPI_FREQUENCY 20000000 31 #define SPI_FREQUENCY 27000000 32 // #define SPI_FREQUENCY 40000000 33 34 #define SPI_TOUCH_FREQUENCY 2500000 35 36 37 // #define SUPPORT_TRANSACTIONS