acid-drop

- Hacking the planet from a LilyGo T-Deck using custom firmware
git clone git://git.acid.vegas/acid-drop.git
Log | Files | Refs | Archive | README | LICENSE

Setup26_TTGO_T_Wristband.h (1742B)

      1 #define USER_SETUP_ID 26
      2 
      3 #define ST7735_DRIVER
      4 
      5 #define TFT_WIDTH  80
      6 #define TFT_HEIGHT 160
      7 
      8 
      9 #define TFT_RST             26   // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V
     10 #define TFT_MISO            -1
     11 #define TFT_MOSI            19
     12 #define TFT_SCLK            18
     13 #define TFT_CS              5
     14 #define TFT_DC              23
     15 #define TFT_BL              27  // Dispaly backlight control pin
     16 
     17 #define TFT_BACKLIGHT_ON HIGH  // HIGH or LOW are options
     18 
     19 #define ST7735_GREENTAB160x80 // For 160 x 80 display (BGR, inverted, 26 offset)
     20 
     21 #define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
     22 #define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
     23 #define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
     24 #define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
     25 #define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
     26 #define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
     27 //#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
     28 #define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
     29 
     30 // Comment out the #define below to stop the SPIFFS filing system and smooth font code being loaded
     31 // this will save ~20kbytes of FLASH
     32 #define SMOOTH_FONT
     33 
     34 #define SPI_FREQUENCY  27000000 // Actually sets it to 26.67MHz = 80/3
     35 
     36 // #define SPI_FREQUENCY  40000000 // Maximum to use SPIFFS
     37 // #define SPI_FREQUENCY  80000000