acid-drop- Hacking the planet from a LilyGo T-Deck using custom firmware |
git clone git://git.acid.vegas/acid-drop.git |
Log | Files | Refs | Archive | README | LICENSE |
Setup209_LilyGo_T_Dongle_S3.h (1990B)
1 // Config for LilyGo T-Dongle S3 w ESP32 and ST7735 80 x 160 display 2 #define USER_SETUP_ID 209 3 4 #define ST7735_DRIVER // Configure all registers 5 6 #define TFT_WIDTH 80 7 #define TFT_HEIGHT 160 8 9 // #define ST7735_INITB 10 // #define ST7735_GREENTAB 11 // #define ST7735_GREENTAB2 12 // #define ST7735_GREENTAB3 13 // #define ST7735_GREENTAB128 // For 128 x 128 display 14 #define ST7735_GREENTAB160x80 // For 160 x 80 display (BGR, inverted, 26 offset) 15 // #define ST7735_REDTAB 16 //#define ST7735_BLACKTAB 17 // #define ST7735_REDTAB160x80 // For 160 x 80 display with 24 pixel offset 18 19 //#define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue 20 #define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red 21 22 //#define TFT_INVERSION_ON 23 //#define TFT_INVERSION_OFF 24 25 // Generic ESP32 setup 26 #define TFT_MISO -1 27 #define TFT_MOSI 3 28 #define TFT_SCLK 5 29 #define TFT_CS 4 30 #define TFT_DC 2 31 #define TFT_RST 1 // Connect reset to ensure display initialises 32 33 #define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH 34 #define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters 35 #define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters 36 #define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm 37 #define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:. 38 #define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-. 39 //#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT 40 #define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts 41 42 #define SMOOTH_FONT 43 44 45 #define SPI_FREQUENCY 27000000 46 //#define SPI_FREQUENCY 40000000 47 48 #define SPI_READ_FREQUENCY 20000000 49 50 #define SPI_TOUCH_FREQUENCY 2500000 51 52 // #define SUPPORT_TRANSACTIONS