acid-drop- Hacking the planet from a LilyGo T-Deck using custom firmware |
git clone git://git.acid.vegas/acid-drop.git |
Log | Files | Refs | Archive | README | LICENSE |
Setup203_ST7789.h (2202B)
1 // ST7789 240 x 280 display with no chip select line 2 #define USER_SETUP_ID 203 3 4 #define ST7789_DRIVER // Configure all registers 5 6 #define TFT_WIDTH 240 7 #define TFT_HEIGHT 280 8 9 #define CGRAM_OFFSET // Library will add offsets required 10 11 //#define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue 12 //#define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red 13 14 //#define TFT_INVERSION_ON 15 //#define TFT_INVERSION_OFF 16 17 // DSTIKE stepup 18 //#define TFT_DC 23 19 //#define TFT_RST 32 20 //#define TFT_MOSI 26 21 //#define TFT_SCLK 27 22 23 // Generic ESP32 setup 24 //#define TFT_MISO 19 25 //#define TFT_MOSI 23 26 //#define TFT_SCLK 18 27 //#define TFT_CS -1 // Not connected 28 //#define TFT_DC 2 29 //#define TFT_RST 4 // Connect reset to ensure display initialises 30 31 // For NodeMCU - use pin numbers in the form PIN_Dx where Dx is the NodeMCU pin designation 32 #define TFT_CS -1 // Define as not used 33 #define TFT_DC PIN_D1 // Data Command control pin 34 //#define TFT_RST PIN_D4 // TFT reset pin (could connect to NodeMCU RST, see next line) 35 #define TFT_RST -1 // TFT reset pin connect to NodeMCU RST, must also then add 10K pull down to TFT SCK 36 37 38 #define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH 39 #define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters 40 #define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters 41 #define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm 42 #define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:. 43 #define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-. 44 //#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT 45 #define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts 46 47 #define SMOOTH_FONT 48 49 50 // #define SPI_FREQUENCY 27000000 51 #define SPI_FREQUENCY 40000000 52 53 #define SPI_READ_FREQUENCY 20000000 54 55 #define SPI_TOUCH_FREQUENCY 2500000 56 57 // #define SUPPORT_TRANSACTIONS