acid-drop

- Hacking the planet from a LilyGo T-Deck using custom firmware
git clone git://git.acid.vegas/acid-drop.git
Setup200_GC9A01.h (1436B)
      1 // See SetupX_Template.h for all options available
      2 #define USER_SETUP_ID 200
      3 
      4 #define GC9A01_DRIVER
      5 
      6 // For ESP32 Dev board (only tested with GC9A01 display)
      7 // The hardware SPI can be mapped to any pins
      8 
      9 #define TFT_MOSI 15 // In some display driver board, it might be written as "SDA" and so on.
     10 #define TFT_SCLK 14
     11 #define TFT_CS   5  // Chip select control pin
     12 #define TFT_DC   27  // Data Command control pin
     13 #define TFT_RST  33  // Reset pin (could connect to Arduino RESET pin)
     14 #define TFT_BL   22  // LED back-light
     15 
     16 
     17 #define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
     18 #define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
     19 #define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
     20 #define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
     21 #define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
     22 #define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
     23 #define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
     24 
     25 #define SMOOTH_FONT
     26 
     27 
     28 //#define SPI_FREQUENCY  80000000
     29 #define SPI_FREQUENCY  27000000
     30 
     31 // Optional reduced SPI frequency for reading TFT
     32 #define SPI_READ_FREQUENCY  5000000