acid-drop

- Hacking the planet from a LilyGo T-Deck using custom firmware
git clone git://git.acid.vegas/acid-drop.git
Setup19_RM68140_Parallel.h (1462B)
      1 // See SetupX_Template.h for all options available
      2 #define USER_SETUP_ID 19
      3 
      4 #define ESP32_PARALLEL
      5 
      6 
      7 #define RM68140_DRIVER
      8 
      9 
     10 // ESP32 pins used for UNO format board
     11 #define TFT_CS   33  // Chip select control pin
     12 #define TFT_DC   15  // Data Command control pin - must use a pin in the range 0-31
     13 #define TFT_RST  32  // Reset pin
     14 
     15 #define TFT_WR    4  // Write strobe control pin - must use a pin in the range 0-31
     16 #define TFT_RD    2
     17 
     18 #define TFT_D0   12  // Must use pins in the range 0-31 for the data bus
     19 #define TFT_D1   13  // so a single register write sets/clears all bits
     20 #define TFT_D2   26
     21 #define TFT_D3   25
     22 #define TFT_D4   17
     23 #define TFT_D5   16
     24 #define TFT_D6   27
     25 #define TFT_D7   14
     26 
     27 
     28 #define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
     29 #define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
     30 #define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
     31 #define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
     32 #define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
     33 #define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
     34 #define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
     35 
     36 #define SMOOTH_FONT