acid-drop

- Hacking the planet from a LilyGo T-Deck using custom firmware
git clone git://git.acid.vegas/acid-drop.git
Setup18_ST7789.h (2001B)
      1 // See SetupX_Template.h for all options available
      2 #define USER_SETUP_ID 18
      3 
      4 #define ST7789_DRIVER
      5 
      6 // #define TFT_SDA_READ      // This option is for ESP32 ONLY, tested with ST7789 display only
      7 
      8 // If colours are inverted (white shows as black) then uncomment one of the next
      9 // 2 lines try both options, one of the options should correct the inversion.
     10 // #define TFT_INVERSION_ON
     11 // #define TFT_INVERSION_OFF
     12 
     13 // For ST7789 ONLY, define the colour order IF the blue and red are swapped on your display
     14 // Try ONE option at a time to find the correct colour order for your display
     15 // #define TFT_RGB_ORDER TFT_RGB  // Colour order Red-Green-Blue
     16 // #define TFT_RGB_ORDER TFT_BGR  // Colour order Blue-Green-Red
     17 
     18 
     19 // My ST7789 display has TCT_CS wired permananently low so the pin is not defined here
     20 
     21 // For NodeMCU - use pin numbers in the form PIN_Dx where Dx is the NodeMCU pin designation
     22 #define TFT_DC   PIN_D3  // Data Command control pin
     23 #define TFT_RST  PIN_D4  // Reset pin (could connect to NodeMCU RST, see next line)
     24 
     25 
     26 #define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
     27 #define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
     28 #define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
     29 #define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
     30 #define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-.
     31 #define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
     32 #define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
     33 
     34 #define SMOOTH_FONT
     35 
     36 
     37 // #define SPI_FREQUENCY  20000000
     38 #define SPI_FREQUENCY  27000000
     39 // #define SPI_FREQUENCY  40000000
     40 // #define SPI_FREQUENCY  80000000
     41 
     42 #define SPI_TOUCH_FREQUENCY  2500000
     43 
     44 
     45 //#define SUPPORT_TRANSACTIONS