acid-drop

- Hacking the planet from a LilyGo T-Deck using custom firmware
git clone git://git.acid.vegas/acid-drop.git
Log | Files | Refs | Archive | README | LICENSE

Setup138_Pico_Explorer_Base_RP2040_ST7789.h (1455B)

      1 // Pico Explorer Base by Pimoroni (RP2040) (ST7789 on SPI bus with 240x240 TFT)
      2 #define USER_SETUP_ID 138
      3 
      4 #define ST7789_DRIVER     // Configure all registers
      5 
      6 #define TFT_WIDTH  240
      7 #define TFT_HEIGHT 240
      8 
      9 #define CGRAM_OFFSET      // Library will add offsets required
     10 
     11 // For Pico Explorer Base (PR2040)
     12 #define TFT_CS 17   // Chip Select pin
     13 #define TFT_DC 16   // Data Command control pin 
     14 #define TFT_RST -1  // No Reset pin
     15 #define TFT_MOSI 19
     16 #define TFT_SCLK 18
     17 
     18 
     19 #define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
     20 #define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
     21 #define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
     22 #define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
     23 #define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
     24 #define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
     25 // #define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
     26 #define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
     27 
     28 #define SMOOTH_FONT
     29 
     30 #define SPI_FREQUENCY       40000000
     31 #define SPI_READ_FREQUENCY  20000000
     32 #define SPI_TOUCH_FREQUENCY  2500000