acid-drop- Hacking the planet from a LilyGo T-Deck using custom firmware |
git clone git://git.acid.vegas/acid-drop.git |
Log | Files | Refs | Archive | README | LICENSE |
Setup137_LilyGo_TDisplay_RP2040.h (1515B)
1 // LilyGo T-Display RP2040 (ST7789 135 x 240 display) 2 #define USER_SETUP_ID 137 3 4 #define ST7789_DRIVER // Configure all registers 5 6 #define TFT_WIDTH 135 7 #define TFT_HEIGHT 240 8 9 #define CGRAM_OFFSET // Library will add offsets required 10 11 // For LilyGo T-Display RP2040 12 #define TFT_CS 5 // Chip Select pin 13 #define TFT_DC 1 // Data Command control pin 14 #define TFT_RST 0 // Reset pin 15 #define TFT_MOSI 3 16 #define TFT_SCLK 2 17 // Don't uncomment next line if you want PWM control of the backlight in the sketch 18 //#define TFT_BL 4 19 20 #define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH 21 #define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters 22 #define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters 23 #define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm 24 #define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:. 25 #define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-. 26 //#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT 27 #define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts 28 29 #define SMOOTH_FONT 30 31 #define SPI_FREQUENCY 40000000 32 #define SPI_READ_FREQUENCY 20000000 33 #define SPI_TOUCH_FREQUENCY 2500000