acid-drop- Hacking the planet from a LilyGo T-Deck using custom firmware |
git clone git://git.acid.vegas/acid-drop.git |
Log | Files | Refs | Archive | README | LICENSE |
Setup136_LilyGo_TTV.h (1366B)
1 // ST7789 135 x 240 display with no chip select line 2 #define USER_SETUP_ID 136 3 4 #define ST7789_DRIVER // Configure all registers 5 6 #define TFT_WIDTH 135 7 #define TFT_HEIGHT 240 8 9 #define CGRAM_OFFSET // Library will add offsets required 10 11 // Generic ESP32 setup 12 //#define TFT_MISO 19 13 #define TFT_MOSI 23 14 #define TFT_SCLK 18 15 #define TFT_CS 5 16 #define TFT_DC 19 17 #define TFT_RST 4 18 19 20 #define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH 21 #define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters 22 #define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters 23 #define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm 24 #define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:. 25 #define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-. 26 //#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT 27 #define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts 28 29 #define SMOOTH_FONT 30 31 32 // #define SPI_FREQUENCY 27000000 33 #define SPI_FREQUENCY 40000000 34 35 // #define SUPPORT_TRANSACTIONS