acid-drop

- Hacking the planet from a LilyGo T-Deck using custom firmware
git clone git://git.acid.vegas/acid-drop.git
Setup11_RPi_touch_ILI9486.h (1399B)
      1 // For ESP32
      2 // See SetupX_Template.h for all options available
      3 #define USER_SETUP_ID 11
      4 
      5 #define RPI_DISPLAY_TYPE
      6 #define ILI9486_DRIVER
      7 
      8 #define TFT_MISO 19
      9 #define TFT_MOSI 23
     10 #define TFT_SCLK 18
     11 #define TFT_CS   15  // Chip select control pin
     12 #define TFT_DC    2  // Data Command control pin
     13 #define TFT_RST   4  // Reset pin (could connect to RST pin)
     14 //#define TFT_RST  -1  // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST
     15 
     16 #define TOUCH_CS 22     // Chip select pin (T_CS) of touch screen
     17 
     18 
     19 #define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
     20 #define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
     21 #define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
     22 #define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
     23 #define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
     24 #define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
     25 #define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
     26 
     27 #define SMOOTH_FONT
     28 
     29 
     30 #define SPI_FREQUENCY  20000000 // Some displays will operate at higher frequencies
     31 
     32 #define SPI_TOUCH_FREQUENCY  2500000