acid-drop- Hacking the planet from a LilyGo T-Deck using custom firmware |
git clone git://git.acid.vegas/acid-drop.git |
Log | Files | Refs | Archive | README | LICENSE |
Setup105_RP2040_ST7796_16bit_parallel.h (2651B)
1 // This setup is for the RP2040 processor only when used with 8 bit parallel displays 2 // See SetupX_Template.h for all options available 3 #define USER_SETUP_ID 105 4 5 //////////////////////////////////////////////////////////////////////////////////////////// 6 // Interface 7 //////////////////////////////////////////////////////////////////////////////////////////// 8 #define TFT_PARALLEL_16_BIT 9 10 //////////////////////////////////////////////////////////////////////////////////////////// 11 // Display driver type 12 //////////////////////////////////////////////////////////////////////////////////////////// 13 #define ST7796_DRIVER 14 15 //////////////////////////////////////////////////////////////////////////////////////////// 16 // RP2040 pins used 17 //////////////////////////////////////////////////////////////////////////////////////////// 18 19 //#define TFT_CS -1 // Do not define, chip select control pin permanently connected to 0V 20 21 // These pins can be moved and are controlled directly by the library software 22 #define TFT_DC 3 // Data Command control pin 23 #define TFT_RST 2 // Reset pin 24 25 //#define TFT_RD -1 // Do not define, read pin must be permanently connected to 3V3 26 #define TFT_WR 4 27 28 // PIO requires these to be sequentially increasing GPIO with no gaps 29 #define TFT_D0 6 30 #define TFT_D1 7 31 #define TFT_D2 8 32 #define TFT_D3 9 33 #define TFT_D4 10 34 #define TFT_D5 11 35 #define TFT_D6 12 36 #define TFT_D7 13 37 #define TFT_D8 14 38 #define TFT_D9 15 39 #define TFT_D10 16 40 #define TFT_D11 17 41 #define TFT_D12 18 42 #define TFT_D13 19 43 #define TFT_D14 20 44 #define TFT_D15 21 45 46 47 //////////////////////////////////////////////////////////////////////////////////////////// 48 // Fonts to be available 49 //////////////////////////////////////////////////////////////////////////////////////////// 50 #define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH 51 #define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters 52 #define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters 53 #define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm 54 #define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:. 55 #define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-. 56 #define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts 57 58 #define SMOOTH_FONT 59 60 ////////////////////////////////////////////////////////////////////////////////////////////